ULTIMATE UL-245E 4.5T
Commercial 4.5-tonne clear-floor 2-post car hoist in Perth, WA, WorkSafe AS 2550.9 registered with a 3,000mm drive-through width for 4WDs and trade vans. With an overhead crossbeam and no floor obstruction, the UL-245E leaves the workshop bay floor completely clear for transmission jacks, oil drainers, and tool chests. Dual-height column extensions (3,870 mm to 4,015 mm) provide flexible ceiling clearance, while three-stage asymmetric front arms and symmetric rear arms deliver wide door-opening angles on passenger sedans and loaded dual-cab LandCruisers. Built with dual hydraulic direct-drive cylinders, a single-point mechanical safety lock release, and an overhead padded shut-off bar to prevent roof contact. Available in 240V (15A) or 415V (20A) models with screw-up lift pads, raisers, and 4WD chassis adaptors included as standard. Stocked at our Maddington warehouse for immediate workshop installation across Perth, regional WA delivery, or nationwide depot freight.
Nationwide Freight to Any Commercial Workshop or Transport Depot
Daily dispatch from Maddington. Same-day Perth metro delivery. Regular road freight circuits to Bunbury, Albany, Geraldton, Kalgoorlie, Karratha, and Port Hedland.
Consolidated linehaul freight to major transport depots across Sydney, Melbourne, Brisbane, Adelaide, Darwin, and Hobart with forklift loading support.
Heavy hoists are packaged in heavy-gauge steel frame crates with high-density rust inhibitor wrapping to guarantee pristine arrival at your workshop.
Specifications & Dimensions
| Lifting Capacity | 4,500kg |
| Overall Height | 4050mm or 4200mm (Dual Height Setting) |
| Lifting Height | 1860mm - 1940mm |
| Pad Height | 110mm - 190mm |
| Overhead Clearance | 3870mm - 4015mm |
| Drive-Through / Inner Width | 3000mm |
| Total Width | 3430mm (3520mm outer baseplate) |
| Arm Reach (Front) | 690mm - 1085mm |
| Arm Reach (Rear) | 985mm - 1500mm |
| Power Supply | 240V (15A) or 415V (20A) |
| Freight Dimensions | 2860mm x 950mm x 460mm |
| Freight Weight | 840kg |
| Minimum Concrete Requirement | 125mm - 150mm Reinforced (25+ MPa) |
| Australian Standard | AS 1418.9 / AS 2550.9 Compliant |
| Warranty Coverage | Commercial Manufacturer Warranty & Local Parts Support |
Workshop Fitment Requirements
To ensure safe operation and compliance with AS 2550.9, confirm that your bay meets the following specifications before hoist delivery:
- Concrete Slab: 125mm - 150mm Reinforced (25+ MPa).
- Ceiling Clearance: Allow minimum 200mm clearance above total hoist height.
- Power Supply: Dedicated circuit breaker installed by licensed electrician.
Key Inclusions & Features
Speak with a Workshop Technician
Unsure if this unit fits your workshop ceiling height or vehicle wheelbase? Call our Maddington technical team for bay layout advice.
